Re: {Chrysler 300} windshield gasket/seal for G

Ryan Hill

On Oct 4, 2021, at 1:56 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Has anyone tried the Go-Jo on a window gasket installed on a car? Would that help on a hard one you'd want to save when pulling the window?

On Mon, Oct 4, 2021 at 1:21 PM Ryan Hill <ryan_hillc300@xxxxxxxxxxx> wrote:

Bob is correct. If you still have your original or can source one that is in one piece, go-jo or similar hand cleaner products with lanolin will not only soften but clean an old dry seal.

18 years ago I treated a hard but in tact seal from my ‘65 300 that spent its life in California. While working on the restoration I hung it up and brushed the surface for a couple weeks until it was pliable enough to set in the bottom of a bin , partially submerged. It was in there for months but seemed workable after a few weeks. Rubbed it down with a nylon bristled brush, then wiped it with rags until it looked like new. Fit great and still is in great condition after all these years. Rarely spends much time in the sun now, to be fair.

I know others have had good experiences with this method.

Hope that helps.

Ryan Hill

On Oct 4, 2021, at 11:48 AM, Cox Mail <scooter465@xxxxxxx> wrote:

Try Murray Park he is the
C body guy.

I also heard that if you soak

Your old gasket with GoJo

Hand cleaner it softens it up.

Bob Haag

On Oct 4, 2021, at 1:38 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Pretty much your only source is a used gasket. Check with John Fowlie at Big M in Williams, CA.

On Mon, Oct 4, 2021 at 9:36 AM JACK DEMAR <oldwoodboat@xxxxxxxxxxx> wrote:

Hello all, I am in need of a new windshield gasket for the G after a lot of google searches and conversations with suppliers I haven't been able to find a source, only some generic extrusions. Is anyone making a proper loop gasket? Quirey indicated he is working on trying to get a source but it's a longer term project. THANKS for any guidance or information. Kind regards/Jack DeMar

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1270871410.62237.1633365378500%40connect.xfinity.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNGm7a3Pw2QB8xjkp_JAe3nfVYZW67wF5x2P3i%2BoaL5qQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/32423C54-3648-4AFC-A99A-03F8C36254AA%40cox.net.