Dan Plotkin: Thanks for the post and pix. I previously bought and installed repro plates in our ’55 and noted they were not as stiff/strong/stout/thick as the originals and were too easy to deform when installing them. Did you notice these issues with the Van’s/Park plates? The RHS looks a little crinked. In any case, installers are advised to treat them gently as you try to get carpet, windlace and screw holes lined up. Thickness, alloy, strength and post stamping heat treatment may be different—resulting in the repro’s being a little delicate. They are lovely and represent considerable time and investment by the vendor—much appreciated. Rich Barber in Beautimous Brentwood, CA From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of dplotkin Put a pair on this morning, fit great. Look great. See photos attached. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: mbpark <mbpark@xxxxxxxxxx> Date: 10/15/21 9:10 AM (GMT-05:00) Subject: {Chrysler 300} 1960-64 sill plates Hello everyone, I have the 1960-64 sill plates in stock and ready to ship. They are beautiful. Anyone interested please contact me at mbpark@xxxxxxxxxxx Thanks, Murray Park -- -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/010f01d7c203%2432a65150%2497f2f3f0%24%40ez2.net. |
Back to the Home of the Forward Look Network
Archive Sitemap