Re: {Chrysler 300} Master Cylinder Made in USA!

["'John Lazenby' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi Gary,

My suggestion would be send your Made in USA Master to for a sleeve and you will never have another issue with it.  I've used these guys for years and never been let down.  

http://www.karpspb.com/

John Lazenby

On Wednesday, October 27, 2021, 10:50:15 AM PDT, Gary Gettleman <gary.gettleman@xxxxxxxxx> wrote:

To All,

     Looking for master cylinder for the '57 C.  Have a wagner unit that i installed 20 years ago and casting reads Made in USA.

Would prefer to buy new made here, but if not able would like source for domestic rebuild kit.

 Thanks in advance for your always great help and knowledge.

  gary gettleman

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACN-kqOnmvCECeUcsK%2BptwM5nix%3D-MqEwc40bbqH3sWKiUtxaA%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1069041454.2331614.1635359011943%40mail.yahoo.com.