Re: {Chrysler 300} Cross Ram Intake Water Crossover Blockoff Availability

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

They are available through the club. You have to cut them down to fit as the factory just cut them off wherever since they stayed with the manifold they were cut from.

On Sun, Nov 7, 2021, 10:20 AM Peter Scherer <peter.c.scherer@xxxxxxxxx> wrote:

Greetings all, 

Working on a 1961 300 G for a client and I'm missing one of the aluminum block-off plates that go in between the intake rams on the head surface. I have two extra on hand for another car, but I can't find an extra for this project. 

Has anyone ever reproduced those block-off pieces? I assume they're the same for 1960-61 and possible 63-64? Also if anyone has extra OEM pieces I'd consider that too. 

Hope y'all are having a great weekend!

~Peter Scherer

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAMcTZSpvbZp-we1nLJJr3U88LDNzmYBGYpMrKbEuHY%3DhZ1uDXA%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPfHEObWmes_WZheGx4UT9Ub08MtnLPkiWwKfykNm%2BAMA%40mail.gmail.com.