Re: {Chrysler 300} G steering box

Bob thank you for the video. I was able to get the box out today. Took about 2 hours, but its much easier without the motor in there.

I need a snap ring for the steering column, I found out why it was flopping all over the place, no snap ring in there. I also have to replace the horn wire I need a suggestion on the type of wire to use. I also have to clean up the signal canceling mechanism it sticks.

Is anyone reproducing an engine wiring harness?

Thanks,

Mike

From: Bob Merritt <bob@xxxxxxxxxxxxx>
Date: Friday, November 5, 2021 at 6:47 AM
To: Mike <michael@xxxxxxxxxxxxx>, Chrysler list server <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} G steering box

Hi Mike;

You should have an easy time removing the steering box
without the engine in the way.
We have a video
that might help, see https://www.youtube.com/watch?v=fv3N6Ism1LI

Hiho
Bob

On 11/4/2021 9:08 PM, Michael Marmorale wrote:

Thank you all for the tips on the 300G steering box.

I’m planning on taking it up to Don in RI with my transmission.

Does anyone have any tips on removing the steering box? The engine and trans are out, but the column-box connection looks tricky.

Thanks Mike

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/D89B553F-7032-415F-9CFE-624BD6F10A73%40contoso.com.