| Just a side note in relation To heat riser crossover valves. By 1974 Chrysler eliminated the heat riser valve on 318 LA Engines. My 74 Charger never Had one. I have 0 cold start Issues. Bob Haag On Nov 9, 2021, at 2:12 PM, apozdol <apozdol@xxxxxxxxxxx> wrote:
Kroil works on everything!
Sent via the Samsung Galaxy S10+, an AT&T 5G Evolution capable smartphone
-------- Original message -------- From: 'Charlie V' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Date: 11/9/21 4:09 AM (GMT-06:00) To: johnlchesnutt@xxxxxxxxx, 'John Grady' <jkg@xxxxxxxxxxxxxxxxx>, 'chrysler 300 club' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>, RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx> Subject: Re: {Chrysler 300} Auction left overs, 1958 392 Hemi engine parts.
Looking on Amazon I see two choices . They both claim to be good for " Heat Valve Solvent ". I have a can of the AC Delco that I use on mine.
Genuine Chrysler Accessories 4318039AC Rust Penetrant - 10.8 oz. Aerosol Can - 4318039AD. Cost 15.02 so there you go Rick 10 times the cost and its probably a much bigger can.
ACDelco GM Original Equipment 10-4020 Rust Penetrating Lubricant - VOC Compliant - 12 oz Aerosol. Cost 13.28
On Sunday, November 7, 2021, 08:56:16 PM EST, RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx> wrote:
Says, $1.50 on the can, the old arisol still works great. I'd happily pay ten times that today, if I found any.
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx>
Sent: Sunday, November 7, 2021 6:46:56 PM
To: johnlchesnutt@xxxxxxxxx <johnlchesnutt@xxxxxxxxx>; 'John Grady' <jkg@xxxxxxxxxxxxxxxxx>; 'chrysler 300 club' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Auction left overs, 1958 392 Hemi engine parts.
Look at the pictures, solvent shown.
From: johnlchesnutt@xxxxxxxxx <johnlchesnutt@xxxxxxxxx>
Sent: Sunday, November 7, 2021 5:59:59 PM
To: 'John Grady' <jkg@xxxxxxxxxxxxxxxxx>; 'RICK AND DEBBIE CLAPHAM' <rixpac@xxxxxxx>; 'chrysler 300 club' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} Auction left overs, 1958 392 Hemi engine parts.
Hi John Grady,
You mentioned the special manifold lube, it is:
Mopar – Heat Control Solvent Penetrating Fluid, 8 Oz can – Benefits: “Better Performance, Faster Warm Up, Smoother Idle.”Part No. 4-187 & Part No. 3419 128
I still have two cans of it left.
Thanks for all your good articles and comments.
John C.
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
On Behalf Of John Grady
Sent: Sunday, November 7, 2021 4:04 PM
To: RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx>; chrysler 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Auction left overs, 1958 392 Hemi engine parts.
You got that right , more common then you think on all
our cars . rusts in the closed position after sitting a few years . there was a special lube for it every few thousand miles back then at oil change .
Sent from my iPhone not by choice
On 7 Nov 2021, at 5:12 pm, RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx> wrote:
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/7AF1BC10-DA4A-440A-B825-2351ABAC43E2%40gradyresearch.com.
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CY4PR2001MB1861A1F9BAC6E590E4FB4D88D4919%40CY4PR2001MB1861.namprd20.prod.outlook.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/441708595.2666303.1636452574294%40mail.yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/618ac7f6.1c69fb81.81380.7abaSMTPIN_ADDED_MISSING%40gmr-mx.google.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/7033F567-CD02-45C8-83BB-289C039A58A4%40cox.net.
|
Back to the Home of the Forward Look Network
Archive Sitemap