Re: {Chrysler 300} The C project

[Cox Mail <scooter465@xxxxxxx>]

Make shore the transmission

Kick down linkage is adjusted

Properly. Shift lever on transmission should be fully

Forward when carburetors

Are at curb idle.

Bob Haag

On Nov 12, 2021, at 4:12 PM, Gary Gettleman <gary.gettleman@xxxxxxxxx> wrote:



To all the Great Folks in 300 letter car land.

Having an issue with the transmission.

The car when cold will take from my perspective take too long before it will up shift to 2nd.

Once it warms up it will up shift, but still seems to take more time than I would expect.

The pressures were tested and all were in spec.

That said at idle the pressure was zero per the spec, however as speed increased the pressure remained at zero until speed reached 25 mph.

Has anyone had this problem and if so what was the fix?

Thank you in advance for all your help and support on this matter.

    gary gettleman 

    Swiss C Rag Project

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACN-kqO%2BfdBtguxmsVai9oqYg74e1_j4m58wgqU5%2BYcDVkhdng%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/07CB293F-379A-440D-A5A8-D3517F8BED42%40cox.net.