Re: {Chrysler 300} In need of '60-61 Plymouth quarter panel patches...

[RON WATERS <ronbo97@xxxxxxxxxxx>]

A word about aftermarket patch panels: They are usually poor quality. The vintage patch panels (Schott, etc.) that were produced in the 60s were deliberately created oversize so they could be slipped over rusty metal and then brazed into place. No good.

If you are doing anything more than an amateur restoration, you want to have metal cut from original, rust-free cars. Then butt-weld that in to replace the rusty sections.

If you are only doing rocker panels, then you may be able to get away with replacement rockers, since the curve is relatively easy to produce.

Ron

On 12/13/2021 10:22 AM rob bohuslav <sonoramic413@xxxxxxxxx> wrote:

All,

Im sure some of you may be into the other Mopar brands, so I figured I'd ask here. I know this is a tall order, but Im looking for both left and right '60 or 61 Plymouth lower quarter patches (around the wheel lip etc...). Im not sure if the Dodges were similar from the same years.  Ive already tried contacting Black Car, and they cant help out at this point. 

Thanks again for all the help,

Rob

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAGQfsuHaSu%3DB7D2Jk3nb40cvShG8eYHV2xZPHLGef422YQn1EQ%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1026406411.71684.1639413419992%40connect.xfinity.com.