Re: {Chrysler 300} ram exhaust manifold springs

["'Charlie V' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I have a few springs if you need as a sample.

On Sunday, February 13, 2022, 09:59:25 AM EST, Bob Merritt <bob@xxxxxxxxxxxxx> wrote:

Jamie and I are researching the springs used

in the exhaust manifold heat risers on F and G ram cars.

Has anybody researched this

and have any data they would like to share

to help us with the project?

Give a shout to bob@xxxxxxxxxxxxx

Thanks.

--

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

---

You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.

To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/62091CC8.9090602%40simplexco.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1575744174.657450.1644791865524%40mail.yahoo.com.