WG: {Chrysler 300} Help-Advice für servopump 383 cui engine ; Chrysler

My question is: if i push the pump upwards - as described in the video- the belt touches/rubs the central fan shaft. There are also marks from former mounted belt.

I slightly remember, that this was also discussed here at a time; but do not remember the solution, how to assemble without the belt touching/rubbing the central fan shaft.

do you have a advice for this ?

thanks a lot again.

hope to bring the car on the street this week

Best regards to you

Johannes

Von: dplotkin@xxxxxxxxxxxxxxxxxxx <dplotkin@xxxxxxxxxxxxxxxxxxx>
Gesendet: Sonntag, 6. MÃ¤rz 2022 01:19
An: johannes schmitz-valckenberg <johannes.sv@xxxxxxxxxxx>
Cc: 'chrysler 300 club' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Betreff: RE: {Chrysler 300} Help-Advice fÃ¼r servopump 383 cui engine ; Chrysler 300 1964

Hallo JoHannes!

https://www.rockauto.com/ has a listing for power steering pump, 1964 Chrysler 383 as well as a 1967 Chrysler and the part number is the same for both. These pumps can be tricky to adjust if you are unaware of the nature of the self tensioning bracket. Bob Merritt has produced a spectacularly useful video of how that works here: https://www.youtube.com/watch?v=boTnyF4n4TY

Good luck!

Danny Plotkin

East Longmeadow MA USA

-----Original Message-----
From: "johannes schmitz-valckenberg" <johannes.sv@xxxxxxxxxxx>
Sent: Saturday, March 5, 2022 4:22pm
To: "'chrysler 300 club'" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Help-Advice fÃ¼r servopump 383 cui engine ; Chrysler 300 1964

Hallo 300 club members

Johannes from Germany writing. Hope you all are good around the world.

as i already mentioned some month ago, i have sealing problems with my servopump and got also here by you advice for this special sealing set for this pump.

now i dismounted the pump and sent to a specialist in restoring servopumps and steering gears in the north of Germany. They called me back this friday and told me, that the polydisc is disformed close to the axle and no chance to seal it.

having done internet research, i hardly find information , just found a restored pump for 1350 Euros ( !!) in Germany, writing , that this will fit to a chrysler 383 cui 1967

my questions are:

does this pump will fit to my 1964 Chrysler 300 383 cui ?
anyone an idea of other solutions / similar fitting pumps ( even not original) to avoid such a big spending for a pump ?

Thank you all very much for indications

keep healthy

all the best from Germany

Johannes

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/AM9P191MB15559781F8D6EA7F79A08806FE069%40AM9P191MB1555.EURP191.PROD.OUTLOOK.COM.

WG: {Chrysler 300} Help-Advice für servopump 383 cui engine ; Chrysler 300 1964