| Agree , lower hoses when old seem floppy easy to squeeze flat . I personally have never seen this scenario of pump suction flattens hoses , heard it since 1960 , but I believe it could happen . New hoses seem made of more rigid stiffer rubber . Possibly only center of bend needs support ? You could make it of solid #8 or 10 copper wire …? Wind around pipe? While on this any one else have any issue with thermostat housing leaks at gasket ? Leaks later no matter what you do to flatten it torque it correctly etc .— It gets old draining radiator 3-4 x only to find it is dripping there again . Dry gasket , rtv gasket etc etc keeps happening . Has to be a reason . Finally fixed with orange silicone gasket I think shared with chev bb . But seems on edge .. weird thing . Happened on 3-4 mopar .. i suspect housing not strong enough to stay flat . Packard had same leaking issue with welded steel necks ( rust through too ) went back to cast iron . Sent from my iPhone On Aug 18, 2022, at 8:54 AM, D.C. Mason <petergriffinforpresident@xxxxxxxxx> wrote:
Hi JY,
For what it’s worth, I asked this question to my local Napa store owner a few months ago and was told that manufacturing has gotten away from using the coil wire, because the hoses are made stronger to resist collapse at temperature now. I’m not sure that applies in every case, but it may be worth looking into. If you use wire maybe somebody makes stainless now to avoid the rusty mess from the plain steel…
V/r dave Sent from my iPhone On Aug 18, 2022, at 6:43 AM, Jean-Yves Chouinard <jymopar@xxxxxxxxxxx> wrote:
Speaking of rad hoses, anybody have a source for the coil wire present in the lower rad hose to keep it from collapsing? I have seen that coiled wire in the upper hose of A/C cars as well, it helps it to stay away from the generator or alternator belts. Lower
hose wire is slightly bigger diameter vs upper hose wire.
Jean-Yves Chouinard.
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of D.C. Mason <petergriffinforpresident@xxxxxxxxx>
Sent: August 18, 2022 2:41 AM
To: apozdol <apozdol@xxxxxxxxxxx>
Cc: Rick King <rickking952@xxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Radiator Hoses
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/A3F905D2-D45C-466E-A986-A9233767374B%40gmail.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/47D435E2-C420-4419-8AED-9E7AC70B7D9F%40gradyresearch.com.
|
Back to the Home of the Forward Look Network
Archive Sitemap