Re: {Chrysler 300} 64 radio fader/reverb unit

I had a 65 Chrysler with reverb. It was turned on by

A push pull switch witch was

Built into the rear speaker

Fader switch.

I believe when switch was pulled out the reverb turned

On.

Maybe shoot some DeOxit in

The switch you might get

Lucky LOL.

Bob Haag

On Sep 2, 2022, at 3:05 PM, John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:

Hi , reverb is a cool thing !
Stereo was just coming out then and some early stereo recordings had highly enhanced “ separation” so you could show your friends that “effect “ = wow its on the right or left“ etc .
So AM and early single channel FM receivers were at a big disadvantage . So Motorola came up with delaying the back sound 10’s of milliseconds , it sounded like a well designed concert hall ( there , it happens by echo off the shaped walls , which takes a certain time ) .
Stereo separation in a car back then was dicey too . I liked it!

The way it worked ( from reading about it then ) a small speaker ( transducer ) powered by rear speaker wires from main radio shakes a mechanical coil spring , about the size of screen door spring , so sound travels a long path moving the spring . , then a microphone type action picks it up at far end .
But that greatly reduced the volume —so a transistor amplifier is in there running on 12 v boosts it back up .
The 12 v for that must come by the radio switch or acc switch ( on all the time running? ) , so check that 12 V feed . The amplifier is subject to bad capacitors — over time they die , or early semiconductors failing . Same as early radios . A good radio guy can fix that and should not be much money . If inclined go at it your self , find the Sam’s’ radio repair folder it is in , those are on eBay now . Will need it to fix right anyway . If not in FSM .
You will like it !
John

Sent from my iPhone

On Sep 2, 2022, at 2:16 PM, Ray Jones <1970hurst@xxxxxxxxx> wrote:

The unit just delays the signal from the Radio a few Microseconds to give an echo.
Sorta like Les Paul's Music (who remembers that?)

Like Danny mentioned, you would have audio in and out. Just disconnect, and join those wires to bypass the Reverb unit.
My L had this feature under the package shelf, but it's been toooo many years ago. While you have it bypassed, look into having the unit serviced, either at a local old time radio shop or with one of the vendors in the Club's publications.
Ray

On Fri, Sep 2, 2022 at 11:01 AM Dan Plotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

From: Dan Plotkin [mailto:dplotkin@xxxxxxxxxxxxxxxxxxx]
Sent: Friday, September 2, 2022 10:54 AM
To: 'Dave Dumais' <dave.dumais@xxxxxxxxx>
Subject: RE: {Chrysler 300} 64 radio fader/reverb unit

Dave-
You likely have a Motorola Vibrasonic which the big 3 used with various names of their own. Should be nothing more than a box with 12 volt and ground supplied, and audio in and out connections. These are transistorized. I have one in a 63 Galaxie XL. My bet is a wiring problem. If it’s the unit John Grady may have some advice. Any old car radio guy should be able to fix it if the problem is inside.

Danny Plotkin

From: 'Dave Dumais' via Chrysler 300 Club International [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx]
Sent: Wednesday, August 31, 2022 1:35 PM
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 64 radio fader/reverb unit

My 64 K has an am/fm radio.

It has the reverb unit in trunk for rear speaker.

And, it stopped working a few years back.

Figures 11 thru 13 in the factory Manuel has
Some wiring details.

I figure to disconnect reverb and get the rear speaker to play.

Has any one dealt with this issue?

Good winter project to pull seats and console the trace the wiring.

Thanks,

In Dave's garage

Sent from Yahoo Mail on Android
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1685404377.1353983.1661967317197%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000201d8bedc%24dfbd0920%249f371b60%24%40northeastretail.com.

--
Ray Jones. Y'all come on down an see us. Ya hear?

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD72c-w5f%2BGCB1_y1H6nekiq1dH4CfxBuHO3GV55HmBfpocGhA%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/B2E279DC-8B37-4C8D-B648-A5BDAFBA874E%40gradyresearch.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/C9CBC726-759E-4B61-8A1E-B1348EE0AD5A%40cox.net.