Re: {Chrysler 300} Compression Test

I'll second that. A good running engine should never be taken apart unless it is worn out or broken. By worn out I mean fouled plugs, oil consumption, visible smoke, lack of power.

If engine condition is keeping you up at night send a sample to an oil analysis firm. The report will tell you exactly what is and is not in the oil together with concentrations thereof. It will show what metals, how much fuel, antifreeze just about everything a blood test reveals about us. Many of my friends use these services.

As John said you are at the mercy and subject to the acumen of the machinist. Given the dearth of skilled workers older machinists who have seen a Chrysler V8 from our period are few and far between. Besides, your test was invalid based on your description.

-----Original Message-----
From: "mgoodknight@xxxxxxxx" <mgoodknight@xxxxxxxx>
Sent: Sunday, September 4, 2022 10:58am
To: jkg@xxxxxxxxxxxxxxxxx
Cc: nicksgaragesd@xxxxxxxxx, allynentertainment@xxxxxxxxx, chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} Compression Test - 413

Pay very close attention to John Grady's recommendations and his analytics involving supposed need for engine rebuild based on the results of a compression test. He's RIGHT ON!!!
All too often the results a grossly flawed, not only because of errors in procedure, but also because of errors in knowledge of how to interpret the readings.
Important clues regarding condition of engine are numerous: rate of oil consumption, smoothness of engine at idle and especially loaded at slow rpm, noise from valves, noises from crankshaft bearings (rods and/or mains, oil leaks can be a clue, but not usually indicating mechanical trouble, difficulty in obtaining consistent/satisfactory ignition timing (suggests timing chain wear likely). Listen to the engine's exhaust-----all 8 cylinders should sound nearly the same. Leaky exhaust valve will likely make an audible WHOOSH sound each time that cylinder has compression/combustion, intake valve leakage is uncommon and not easy to detect by sound. Loose pistons (worn cylinders) might give an audible light thump as slow idle when cold, but likely will go away as warm-up occurs. Aircraft engines usually have quite audible piston noise for a few minutes after start-up (air cooled engines generally have very loose fit pistons compared with liquid cooled engines.

Please note: message attached

From: John Grady <jkg@xxxxxxxxxxxxxxxxx>
To: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Cc: Matt Allyn <allynentertainment@xxxxxxxxx>, Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Compression Test - 413
Date: Sun, 4 Sep 2022 09:20:42 -0400

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/20220904.105840.9633.0%40webmail03.dca.untd.com.