RE: {Chrysler 300} 62 parts

I am not sure either but all 5 of my wheels are that way. I was hoping one on the car could be exchanged to use as the spare. I don’t think the spare would be that way because it doesn’t work very well with using the jack base to clamp the wheel down.

From: Nick Taylor [mailto:nicksgaragesd@xxxxxxxxx]
Sent: Tuesday, September 20, 2022 12:18 PM
To: Drew Carl
Cc: Chrysler list server
Subject: Re: {Chrysler 300} 62 parts

The 15" wheel with the hub cap prongs sounds like the ones they used on the 300J, which are also used on police vehicles back into the 1950s. Not sure if the same style was used on the 300G and 300H.

On Tue, Sep 20, 2022 at 8:24 AM 'Drew Carl' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Thank you all for a lot of help in figuring out a lot on the parts I am looking for. I am down to needing a proper spare wheel, and bumper jack, and I would sure like to set of proper manifold bolts though I don’t think that will happen. Joe Williams was able to help me figure out that the bumper jack hook should be 2204073 but of course I do not have that hook somehow and I don’t even have a jack that would be correct. I found someone on ebay selling jacks they claim to be new but they do not have the correct hook.

Does anyone know what a proper wheel should measure in width? I assume it should measure 6.5 inches. My spare has prongs riveted to the center to hold a center cap so I know this is not correct. The only other option I have here is a 7.5 inch wide wheel which I believe is too wide. I am going to call a few places and try to find a wheel and bumper jack today. Big M, Moore, and Benny Buckner in WV are the places I know of to call. Any help is appreciated.

Drew Carl
Owner, eScore
Phone: 724-288-6636
Email: drew@xxxxxxxxxxxx
Website: www.escoremx.com
Address: 1280 Henderson Avenue Washington, PA 15301

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/106101d8cd05%241705db60%2445119220%24%40escoremx.com.