John, The correct cables will be 4 gauge, with flag terminals (90 degrees) and the positive with have a terminal wrapped around the cable for the starter relay under the voltage regulator. Check with JC Auto or Quirey. These were reproduced years ago by George Cone, I have a pair on my G. I do not know what is currently available. Bob J From: mguarneri via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> I am wanting to replace my battery cables on my G (with A/C) and was wondering what is the proper gauge (4, 2, 1)? Also anyone knows of a company that sells them with a 90 degree end? I did look on the tech page and the NAPA part is no longer available and NAPA directs you to a 4 ga. 27" HD truck cable with a straight connector. Thanks all, John 300G conv -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/02a401d8d760%243aba26a0%24b02e73e0%24%40comcast.net. |