{Chrysler 300} Body to Frame

[Ron Kurtz <mark6268@xxxxxxxxxxxxx>]

Hello, everyone:

E body is now back on the frame and squared to within 1/16 inch. Regarding the tightening of the bolts to 18 ft. lbs., is there a preferred sequence of tightening them down to prevent any distortion to the body? 

My thought is to start with the middle bolts, torquing them to ten then work alternatively to the front and rear and repeat the process torquing them to 18.

Suggestions?

Best,

Ron Kurtz

E #292     

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/259236274.1292202.1665708058500%40mail.yahoo.com.