I just mounted a set of new 14x6 steel wheels from Vintiques. The hole for the stock cover is a hair off. I used the very short brass stem’s, and I am going to hunt down some of the angled extensions that are out there. I hope to find one
that will hit the existing 300K hubcap hole.
James
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
On Behalf Of Nick Taylor
Sent: Thursday, October 27, 2022 2:04 PM
To: Dave Dumais <dave.dumais@xxxxxxxxx>
Cc: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 64 300 long tire valves
I used 1 1/2" ones on my 1960 Chrysler wagon with 1959 Imperial wheel covers. Same basic wheelcover as used on the 300G. Also make sure you get ones that fit your valve stem hole.
I get my valve stems from Napa Auto Parts.
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMhRp6sZqAKx0T0y7cVGOkxvSHiV5MWhxmZy_iN9cyy2Q%40mail.gmail.com.
