Re: {Chrysler 300} Torsion Bars 1963-1964

[leslie miklas <ldmiklas@xxxxxxxxxxx>]

I measured torsion bar #'s 610 & 611 at 1.005" (with paint)

Ram bars #'s 606 & 607 at 1.015" (with paint)

Length is 40"

Jeff Miklas

On 11/13/2022 1:33 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Has anyone measured the stock bars and also a set of the 1963 or 1964 RAM bars for their diameters, their static index angle and their length?

I know that the trailer towing package, police and taxi also used the same thicker bars.

If I cannot find a used set with the sway bar and thicker structs then I may just order a modern bar. On my previous ’64 300K I found a parts car with the trailer towing package and pulled the rear springs, the torsion bar, the structs, the sway bar and the 3 inch rear brakes. The car rode and handled much better than the with the factory stock arrangement.

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61710B5BC1B0C0CA7156AEE793029%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/83681724.1234595.1668580119528%40connect.xfinity.com.