{Chrysler 300} Re: 1962 300 Sport Frame Measurment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Re: 1962 300 Sport Frame Measurment



PS - 
Would someone mind measuring the front of the oil filter forward to the frame cross member in front of it?

When I measured from right above the bolt for the lower control arm pivot forward to the front cross member, I get 9 3/4”, on both sides.
Thanks

Matt Allyn

On Nov 15, 2022, at 6:55 PM, Matt Allyn <allynentertainment@xxxxxxxxx> wrote:

Dealing with a frontend wreck on this old car.

Need to know what the (undamaged) distance should be on the drivers & passenger sides of….

- Face of Cross Member where the motor mounts live
….forward to….
- Rear side of Cross Member where the front of the strut rods protrude through

I have attached a picture with a pathetic attempt at drawing a line of where I need the distance measured please.
I measured the wheelbase on both sides & they match the 122” dead on; so that is a positive.

Thank you!

<Frame Measure.pdf>

Matt Allyn


--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/47FE0BFB-A727-4A2D-BD79-C220A4B4CAD8%40yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.