{Chrysler 300} Power Steering Gear

[Loren Nelson <lorenhelenn@xxxxxxxxx>]

I am Loren Nelson and my 300G steering gear is leaking at the pitman arm. I have removed the pitman arm and seal dust shield. The FSM says to remove the seal with Puller C-xxxx. I don't have that puller and don't know where to get one. I tried O'Reilly's and they don't have a similar tool..I plan to remove the seal by drilling holes in the seal and use 1/4-20 sheet metal screws pushing on the end of a brass bushing that is shown in the FSM to be at or near the seal. 

My question for the Club members is this plan a good one or will I mess something else up in the process? 

Thanks,

Loren

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANvhwYaUbsyDv9XJfzj9Ro1fCeyHoU%2B29xJZdp2EXybobWKKnQ%40mail.gmail.com.