Re: {Chrysler 300} 1960 300F Wheel Cylinders

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

We got the centric ones for a 1961 Belvedere and the lower fronts have the bleeders too close to the steering. Also, it took three different sizes of wrenches for the bleeder screws. 

On Wed, Jan 11, 2023, 2:01 AM Marshall Larson <granitledge@xxxxxxxxx> wrote:

I have the Centrics in three cars. Functioning properly.

On Tue, Jan 10, 2023 at 8:29 PM Jim Birr <jebirr@xxxxxxxxx> wrote:

Hi everyone.  Looking to pickup new wheel cylinders for my F.  Found following sources and rough prices:

• Andy Bernbaum - $40 ea
• Rock Auto - Dynamic Friction $16.60/ea
• Rock Auto - Centric $18/ea
• MoParPRO - All six for $179
• NAPA only has rear for $65

Anybody have any experience with any of these vendors for brake cylinders?  Andy B. seems a bit pricey.   Not sure if Dynamic Friction or Centric products are any good.  Heard some negative on other Centric products.  MoParPro is an unknown.

Thanks in advance.

Jim

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/b9965624-aa93-4c72-94ac-64b86f921025n%40googlegroups.com.

--

Marshall Larson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNRiFLWpwgy7P_EXKew4v9z-KD3iAuwPj2iY666Sx%3Dzk-A%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMUBNvocX%3DXjq%3DRfVoOnqxuDVs6G2srjywmVGsx8OK5Yw%40mail.gmail.com.