|
Dave, That is .380 equals 9.652mm. Take a look at the products in the catalog here:
31 Inc. many of the stems are 9.7MM. I do not think the difference will cause an issue. A small reamer would take off that 0.048 inch if need be. James From: 'Dave Dumais' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
A chilly hello to All, The original 64 14" rims use the premier 8139 TR 413 valve stem. The rim hole measured .380" Who has completed this issue before me? A lots of TR 413 stems listed, most rim holes larger than .380 Thanks Dave D. -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171EB7C03A0343B47C77C0893D59%40CY5PR19MB6171.namprd19.prod.outlook.com. |
Back to the Home of the Forward Look Network
Archive Sitemap