Re: {Chrysler 300} 1964 Chrysler front bumper

[RICHARD HUSS <rhuss214192@xxxxxxxxxxx>]

what does the bracket look like? I have a 61 bumper. Richard

On Jul 20, 2023, at 3:04 PM, 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Anyone have a VERY bad front bumper that the front passenger side bracket, the one on the bumper not the spring steel one, in good shape? If so, I would like to pay you if you can cut it away from the bumper and ship it to me.

 

I have one that is bent, and I used by jaws to pry it out and on the last push the lower three spot welds popped. I could heat and pound it to shape but drilling the top three spot welds and then rewelding a good bracket, on the backside with heat cream on the front side, is less time and would have a better outcome.

 

Thanks, James

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171936139266F2B4BD3096E933EA%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/ABD91F6A-26C6-4249-B537-9BDC2481D814%40comcast.net.