|
I am making up an order from QQD and would like to ask folks about front and rear seals. How have your experiences been with the extruded, not molded seals for the front and the rear. I take it from the catalog that on the rear there are two distinct patterns in the seal. A top and a bottom. But, what about the sides? One classic car buddy, not a Chrysler guy, said he has had luck using new extrusions with USED molded corners. He fits it all and pulls it and glues the corners good then proceeded with the installation. Thoughts on that as a process? I do have a spare rear window with a seal that is complete. I do not plan on taking the rear window out unless something comes up that makes it necessary. The windshield has some scratches and the like and for daily driving at night in
the rain I wonder if I may need to order a new window from the guy in LA and if so, what to do seal wise. Anyone with thoughts or experience with this would be a help. Thanks, James For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61719BD92F7B6D9777F599AA9317A%40CY5PR19MB6171.namprd19.prod.outlook.com. |
Back to the Home of the Forward Look Network
Archive Sitemap