RE: {Chrysler 300} 300-F Exhaust

Jim-

As Mike said Waldron will do a nice system for you. Perfection is elusive, Waldron is close enough. They built me a system bow to stern and it went in almost like butter. Had to swap a couple clamps, but I’d use them again. Aluminized is plenty for a garaged hobby car.

Danny Plotkin

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of Jim Birr
Sent: Monday, September 4, 2023 2:03 PM
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 300-F Exhaust

Getting ready to order new exhaust from Waldron. Think I'm going with aluminized steel. To my chagrin they have options in the order form for U-bolts/clamps, hangers and gaskets. I would have thought these would be known quantities and be included. The real question is what is the proper numbers. My best guess is:

8 sets of U-bolts and clamps
4 gaskets?? (one at exhaust, one at flange joint - both sides?)
6 hangars? Really not sure about this one.

Anybody know the correct answers? There will be a prize. (not really)

Jim

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/8402d524-f593-4812-b69b-06aaf73c709bn%40googlegroups.com.