|
Well, I double checked the Master Parts Book and it is of little help. I must say that the 1964 MPB is worthless as compared to my 1940’s MPB’s as to fasteners. In the older books they list the actual size and material of all the fasteners. Since the rears use the stiffener plate, I am going to assume that the longer bolts go there to account for the plate. James From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Hi All, I am getting ready to put the bumpers back on the car and I have a problem. The round head bolts that stick out of the spring steel bracket and go into the body and are held in with that spring steel washer until you bolt it up… There are two lengths. Which goes on the front and which on the rear. When I tossed them into the bag after glass bead and paint, I did not realize they are two lengths. Can anyone help? James -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171B74B299BD4564CEA694093F9A%40CY5PR19MB6171.namprd19.prod.outlook.com. |
Back to the Home of the Forward Look Network
Archive Sitemap