--Marylin,
It’s been a few years since I had the starter out in my G, but I do remember using a long extension with a 5/8” (I think) socket and going over the top of the starter to reach the bolt. The F should be very similar.
Bob J
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Michael Reed
Sent: Tuesday, September 26, 2023 9:51 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Removing starter on 1960 300f
Hi. Marilyn Reed here. I need to remove the starter on my 60 300f to have it rebuilt. We are having difficulty removing the top bolt. Is there a special way to do this? Any guidance is greatly appreciated.
Thank you.
Marilyn
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1473585836.861943.1695747043986%40email.ionos.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00da01d9f0a0%24b595fe80%2420c1fb80%24%40comcast.net.
Back to the Home of the Forward Look Network
Archive Sitemap