https://www.ssnake-oyl.com/ This outfit appears to be a full-service shop for seat belts. Being diametrically enhanced, the stock belts in our K conv are a little snug. If similarly built and replacing the belting, consider adding 6” or so. Rich Barber Brentwood, CA From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Hi All, I need to get a full set of seat belts for the 1964. The front webs are bad and the chrome on the buckles are going. The rear seat has some modern belts. Has anyone had any success finding new factory looking belts where the buckles are nice and heavy like the originals? Someplace, although I cannot find them with an easy look, I have a box with a bunch of old buckles if I can find it. But the time to re-chrome and then send out for new webs… So, there is a good source with good product, I would like to hear about it. Thanks, James -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/01ad01d9f187%24e9244e90%24bb6cebb0%24%40ez2.net. |
Back to the Home of the Forward Look Network
Archive Sitemap