RE: {Chrysler 300} 63-64 small part search

Allan,

Are you talking about those little plastic ones on top of the seat that the headrest slides into? Tough to find in good shape.

On the door handle gaskets. On mine I took them and wiped them down with lacquer thinner then, I sprayed several coats a couple of days apart of Plasti Dip to build them back up. Worked fine.

I used Plasti Dip on a lot of parts on my 1949 Desoto for which there were no replacements available. On some parts I dip them into Plasti Dip then let it drip off then cut off the tails then spray one coat to even it all out. Takes some time but works.

James

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of apozdol@xxxxxxxxxxx
Sent: Sunday, October 15, 2023 05:45
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 63-64 small part search

Howdy All,

Might anyone have a couple of spares for my 64 K? I am looking for an early headrest cover trim, black preferably but I would take any color.

Also looking for a set of drivers door handle gaskets for a 63-64, not crushed through like mine.

Thanks in advance!

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/004501d9ff65%245c13edd0%24143bc970%24%40comcast.net.