RE: {Chrysler 300} Ignition Coil Capacitor

Power to the A/C compressor

The female end may be broken off where it comes out of the magmet?

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Zach Hietsch
Sent: Saturday, October 28, 2023 1:58 PM
To: John Grady <jkg@xxxxxxxxxxxxxxxxx>
Cc: Dan Plotkin <dplotkin@xxxxxxxxxxxxxxxxxxx>; Chrysler list server <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Ignition Coil Capacitor

Here is the plug I am not sure what it supposed to plug into. Like I said before it runs from the main harness by the brake booster and across the engine to over by the AC condenser. I can’t see any plug that it would go to. It’s also been unplugged for as long as I can remember working on this car. So if it’s nothing important I’ll probably just leave it for now.

Any insight is greatly appreciated.

Thanks

Zach Hietsch

On Oct 23, 2023, at 3:46 PM, John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:

yes Danny right the capacitor on the coil connector to the wire that does NOT go to the points . it has no impact on car running .
The important one for running is inside the distributor
Really should it put 12 v right into coil
with no ballast resistor , can burn up coil
if left on very long and can burn face of points too
Again Dan is correct , use factory manual for colors and functions .
You cannot just “ try it and see”
with electric wires , you can easily burn up your harness . Manual is very good if you take your time on it
good luck john
Sent from my iPhone

On Oct 23, 2023, at 11:06 AM, Dan Plotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

Insight will be dim. Photos would help, color of wire too.
Best thing is for you to get out your shop manual wiring diagram, study it a bit along with your wire and soon enough you will figure it out. The capacitor on the coil is a noise filter to keep HV ignition noise out of the radio speaker.

Danny Plotkin

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of Zach Hietsch
Sent: Monday, October 23, 2023 10:53 AM
To: Chrysler list server <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Ignition Coil Capacitor

Hello,

I am working on getting my B running and I have a few loose wires that I am not sure what they do or if they are important.

One of those wires is on the ignition coil. It was connected to a capacitor. The capacitor was not connected to anything. I'm assuming if it is supposed to be connected to anything it's a ground. We weren't getting a good spark so I have a jumper from the battery directly to the positive side of the coil. Get a good spark and the car fires quite nicely. Though the key doesn't shut the car off. This is just temporary.

Another wire is more mysterious. It comes across the engine bay from the driver to passenger side. My car has AC so maybe it's for that but I cannot see any plug for it. The plug is not one that shows up anywhere else on the car that I can tell. It is oval/elliptical and has a decent gauge wire coming off of it with a 2-3" rubber boot at the end.

I can take some pictures later but was curious if anyone had any insight.

--
Thanks
Zach Hietsch
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAH16hEX_uV-UtdF%2Biu5OOR1nHsb5O888rQFTtB-t6G3nZDgROw%40mail.gmail.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000001da05c2%248836d4a0%2498a47de0%24%40northeastretail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/B8FA5A44-D097-41F7-8A54-E39565E51863%40gmail.com.