{Chrysler 300} SMS Door Panels

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Anyone in the club have SMS make them new door panels? I did two sets in the 1980’s myself using Restoration Supply and Specialties tar impregnated multi-ply door material. It took a lot of hours to cut them correctly and transfer everything over. I really do not relish doing it again.

 

That said, SMS uses the same pressboard the factory used, and that stuff is nothing but a giant sponge. I like the idea of saving me the work, but I am loath to have panels made from that crap. In addition, those pressboard panels come apart at the clip holes even when using the correct player to pull them away.

 

Given that 1964-1964 has such a problem ongoing with the regulator mechanisms failing, one must get into those doors more often than all my other cars. More chance for door panel problems.

 

So, if any has spent the money having them make up a new set, I would like to hear about your experience.

 

Remember. Daily Driver. Lot of use.

 

Thanks, James

 

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171F2D6B360F1ADDB137F0293A7A%40CY5PR19MB6171.namprd19.prod.outlook.com.