My local radiator shop did a 4-row conversion on my original 300C
radiator, silver soldered a leak in the transmission fluid cooler,
retained upper and lower tanks, pressure tested both the coolant
and transmission fluid circuits (in a big tank to see bubbles)
while I watched, and repainted everything nice semigloss black for
$400. However, that was 9 years ago, and I haven't inquired about
current prices since then (no need).
Ray Melton Las Cruces, NM
****************************************************
hate to say it but aluminum universal works fine , ? paint black, i did not ( please no rocks thrown ) ? 300 $ . Keep hood closed--I did it , have to get reducer hose sleeve .
But i think going ahead , the look bothers me ,too much that was in 383 58 dodge
going back to real .
maybe out of this we find a real source for a new 4 row . Publish the prices . Glen ray was like 1000$ , but yes good stuff . , big vendor to mopar muscle guys
Anyone under that $ new 4 row ? for real ?
I found good prices at rock auto on 67 dart wide one copper for V8 maybe 300 , hit a close out .
Apparently some problems with rebuilding ours now , tube dimensions of available cores changed ( China?) so old top and bottom mopar end plates under tanks can’t be used over ? Unless a lot of reworkThis issue made rebuilding Packard 37 radiator with a “modern core” under old tanks hit 2000 . They can make original look core by hand , over 3000$ lWhy new makes some sense looking ahead ?--
Sent from my iPhone
On Nov 13, 2023, at 3:32 PM, rob bohuslav <sonoramic413@xxxxxxxxx> wrote:
Ive heard nothing but good things about Glen-Ray Radiator as well (as was previously mentioned).
--On Sun, Nov 12, 2023 at 2:14 PM Scott T <scotttaylorsc@xxxxxxxxx> wrote:
I recently had the original radiator recored for an L by GlenRay. Great work and nice folks. Not cheap… but it’s original and beautiful. Carried it to Carlisle and picked it up at the Mopar Nats in Columbus. I’d have no hesitations recommending them.
Scott
--
On Fri, Nov 10, 2023 at 8:28 PM 'warren anderson' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
Hello Club Members,
I just started my rebuilt engine today. First time the engine ran in over 40 years since it was parked. I was breaking in the camshaft and at the 20 minute mark, poof!, the radiator sprung two leaks! What a mess that made.
Anyway, in my area, all the old school radiator repair shops have disappeared. I’m looking for radiator repair shop that can replace the core or provide a good replacement.
Does anybody know where I can look?
Best Regards,
--
Warren Anderson
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/125980400.624734.1699666127212%40yahoo.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANDych2nVcvrOTAxFwujDYtEL3PjgfYvY2_j9eJoovJ6F27HCA%40mail.gmail.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAGQfsuEPRrx0ehgXQMN1ROkJAoTmJcEQ%2BRFiXRVbEtycVT%3DnRg%40mail.gmail.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/C2562482-82F0-43D0-B060-F1057BB2046A%40gradyresearch.com.
Back to the Home of the Forward Look Network
Archive Sitemap