Re: {Chrysler 300} Transmission filler tube 300F

["'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi Tom
Wish someone was repro’ing these- I thought about trying to make one (the tube) and an oil dipstick tube.  Was noticing the other day on the oil tube that it may be possible to use a steel line of the right diameter (5/16 or 3/8” maybe; have to check it) and just make the length correct.  May also be able to do the same (correct larger diameter tubing) for the ram car transmission tube.  The dipstick itself however may be more challenging?  Unless they are available at the right length.  Just a thought for a plan B.  One piece at a time 😄

D&K

Sent from my iPhone

> On Jan 9, 2024, at 10:30, Tom Wilburn <tomwilburn1@xxxxxxxxx> wrote:
> 
> I need a transmission filler tube and dipstick for my 1960 300 F. Does anyone know where I might source this? 
> 
> It is of course a special tube for ram cars. 
> 
> Thanks, Tom.
> 
> Sent from my iPhone
> 
> -- 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> --- 
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/4C3D5203-4725-4AA0-AFB6-05A7B235EA2B%40gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E644698F-C0B3-4E1A-B154-31B8BEBFEA56%40yahoo.com.