RE: {Chrysler 300} Transmission cable repro source

Is Lee in the club? I do not do Facebook. I would like to get a set as I will be doing a transmission swap in the next few months. I would like to get his old set to send to these guys to make my up some new ones to have on hand when I do the swap.

Thanks, James

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Noel Hastalis
Sent: Monday, January 15, 2024 10:08
To: Chrysler300 <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Transmission cable repro source

Here's a Facebook posting by a Lee Meyer, K Ram owner, that may be of interest -

I recently was dreading getting transmission cables replaced or rebuilt for my 300 Ram K. I am pretty tired of the small amount of vendors that sell or rebuild parts for these old mopars, because of costs, poor quality, waiting years for things etc. So, a friend of mine who is a race car guy recommended this company in Santa Fe Springs CA that make control cables for race cars, boats and whatever. I sent them my shifter and park cables and the guy says no sweat. ONE WEEK later i had my new cables and they are spot on perfect better than factory by a mile. Pretty much an impossible feat for these chryslers. So, tell the other guys (you all know who they are) to pack sand and call these dudes. Control Cables Inc 562-949-0455 www.controlcables.com

Lee's photos are attached.

Noel

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F3AEF5D0-D2C2-4BE5-91E5-406C81585888%40comcast.net.