RE: {Chrysler 300} 1964 A/C hoses

’64 used “O” rings….

From: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>
Sent: Wednesday, March 20, 2024 11:20
To: James Douglas <jdd@xxxxxxxxxx>
Cc: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 1964 A/C hoses

James

If you are going to retain the original flare fittings on your R12 system, you might want to look into using inexpensive soft copper gaskets that are available on Amazon. Flare fittings are notorious for being leakers and I’ve had to fight it and keep using up more of my R12. So I bought some of these copper flare fitting gaskets, but have not yet installed them. Hopefully they will seal the system better.

Keith Boonstra

On Wed, Mar 20, 2024 at 12:31 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Anyone have a supplier and part number for new A/C hoses for a 1964 Chrysler single 4 BBL?

The ends of the hoses have steel bends on the factory units. I doubt I will find anything like that. I hate to try and re-use 60 year rubber with the cost of R-12.

{Yes, I am not converting, I have a place that can do R-12}

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61712C6AC2DA5A07C0AAFF8793332%40CY5PR19MB6171.namprd19.prod.outlook.com.