{Chrysler 300} 300g Transmission lines and filter

[Michael Marmorale <michael@xxxxxxxxxxxxx>]

Hello, I’m putting the last bits on the G and I ran into a snag on the transmission cooler lines.  Should I put an inline filter in the line or just connect the lines and then connect to the cooler?  When I put an inline filter the line was too long. 

 

I purchased stainless lines from inline tube, the G did not have the stock lines on it when took it apart.

 

I put a couple of pics below of my situation.  Are there different repop lines I could buy?

It’s a stock 61 torqueflite. 

Thanks for any help on this. 

 

Mike

 

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DM6PR16MB36114C675086566CC14D76F0B4002%40DM6PR16MB3611.namprd16.prod.outlook.com.