{Chrysler 300} 1962 Dash Pad

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I am into swapping out the Dash Pad….as I just received a beautiful one from RD Autoline.

When I do this for my H - I will assemble the entire dash, with pad, on a bench….

As doing this job IN car is a nightmare.

Anyway….

From the factory - Were the Dash Pads applied with adhesive?

I understand the Dash Pads are kept in place & in shape via the:

• Arrow Tabs
• Threaded Studs
• Astrodome Upper Shell

I understand that once I AM able to get the old pad off, I will need to somehow:

• Remove all of the old foam material stuck to the top of the metal dash
• Make it all as smooth as possible in preparation of the new pad

When I go to install the new pad:

• Do I need to use some sort of adhesive to help glue it down to the top of the metal dash?
• Or nay?

Hating my choice to swap the pad… 😳

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/360F850B-0D01-4B89-96AB-1513FF5825B4%40yahoo.com.