{Chrysler 300} CVT top goes down not up

[Tim <timb@xxxxxxxxxx>]

I will start by admitting I am not the most mechanically inclined. However I purchased my 61 300g a few years ago and there was some leak issues in the hydraulic lines for the top. I had my local mechanic take it apart look at it we ended up replacing both of the compressors or lifter pumps, and filled and bled all the lines. Everything seemed to be good for a year. Last year when I went to put the car away the top would not come up it took a couple people manually to lift it and close it for the year. I backed the car out of the garage this spring and it went down perfectly fine I tried to bring it back up with no luck. So I'm wondering if people have thoughts on how I can direct my mechanic on this type of an issue. Power Top goes down fine, but does not come up.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/663a8e24.630a0220.cd809.b767SMTPIN_ADDED_MISSING%40gmr-mx.google.com.