RE: {Chrysler 300} Rear brake proportioning valve

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

John,

You are welcome. A little story behind that...

About 20 years ago I was driving my daily driver, a 1947 Desoto Suburban with a 139.5-inch wheelbase, down a San Francisco Bay Area Freeway at 65 MPH. Coming close to a place called the Caldecott Tunnel a guy in a car cut me off and then stopped dead. 

With drum brakes I know I could not stop and I also knew that if I tried I was likely to fight the steering to keep it straight. I had to crank over on the steering to the right hoping my peripheral vision was correct that nobody was next to me.

When I made that maneuver to miss the idiot, I was now heading to the tunnel entrance wall. I had to swing the steering back straight and all the while I was sure the thing was going to snap and roll.  I figured I was dead.

The front of the Desoto tried to lurch over, but it did not. It felt like the very long wheelbase held it back as the car twisted in the middle. I got the car to settle down and through the long tunnel.

When I popped out the other side a guy cam up next to me in an SUV and rolled his window down and yelled at me that that was great driving. He saw the entire episode. I yelled back that I needed to change my underwear.

The next week I started on a front disc brake set up for that car so that a high-speed panic stop would at least have some decent directional control. Particularly for such a tall center of gravity car.

Doing that conversion, I learned all about "modern" brake systems and their components.  

James



-----Original Message-----
From: John Grady <jkg@xxxxxxxxxxxxxxxxx> 
Sent: Sunday, May 12, 2024 11:16
To: James Douglas <jdd@xxxxxxxxxx>
Cc: Zach Hietsch <zhietsch@xxxxxxxxx>; Chrysler300 <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Rear brake proportioning valve

that is really excellent ; more to it than i ever understood . needs a drawing ( i told them that) but a lot of  mysterious stuff and misinformation removed from my understanding of it . 
Thank you James 
Sent from my iPhone

> On May 12, 2024, at 1:20 PM, 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
> 
> Zach,
> 
> Suggest you rear the following:
> 
> https://shop.wilwood.com/blogs/news/how-does-a-proportioning-valve-work
> 
> James
> 
> -----Original Message-----
> From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Zach Hietsch
> Sent: Sunday, May 12, 2024 10:05
> To: Chrysler300 <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
> Subject: {Chrysler 300} Rear brake proportioning valve
> 
> Hello All,
> 
> I am finishing up the brake lines for my conversion to front disks. My kit from AAJ brakes came with a prop valve for the rears.
> 
> Should I install it and if I do what is the correct procedure for setting it.
> 
> I have found a lot of different ways to do it and I am unsure on which one I should follow.
> 
> Thanks
> Zach Hietsch
> 
> --
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ---
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/516BD6D6-393B-4DDE-9AC2-CB1848F52550%40gmail.com.
> 
> --
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ---
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61715C95F2A4DA15F0AE8D2D93E12%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61719B71BE59B5DD015E9CE593E12%40CY5PR19MB6171.namprd19.prod.outlook.com.