Re: {Chrysler 300} 300H Carter AFB 3259S Rear Carburetor Problem

["'Keith Langendorfer' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Try Neil Jenks 😀

On May 27, 2024, at 10:34 PM, Kurt Brueske <kurt.brueske@xxxxxxxxx> wrote:

Would anyone happen to have, or know where I could find, the part for a Carter AFB 3259S rear carburetor where the accelerator linkage connects to the stud?

I went through the '62 service manual carb-to-carb and transmission kick down linkage adjustment procedure (8-step) today.  Once done, I actuated the linkage and heard a "pop" after which the pedal went to the floor.  When I came up top into the engine bay, I noticed that the carburetor linkage broke and found what appeared to be a past crude weld and possible JB weld botch job.  Never a dull moment...I'm glad this happened in the garage rather than on the road!

I've attached a few photos.  Appreciate any and all help.

Thanks,

Kurt

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/51c957fb-2413-4a4e-8eec-c50f7787dc58n%40googlegroups.com.

<3259S broke stud.jpeg>

<3259s.jpeg>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/5A25A959-B80A-4259-A521-EEF58674F5BD%40yahoo.com.