Re: {Chrysler 300} 61 starter recommdations

[Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>]

This seems like an awfully elementary suggestion, but are you sure that your timing is optimal? A little too much advance could give you pre-ignition resistance to starting when hot.

Keith Boonstra 

-

On Wed, Jun 26, 2024 at 11:13 PM Michael Marmorale <michael@xxxxxxxxxxxxx> wrote:

Hello all I got the G running and driving!  Finally. 

 

It is very hard to start when hot, the starter barley turns the motor over.  Cranks fine cold, and I just put in a new group 27 battery.  

 

It feels like the starter is tired. 

 

Is there a high torque starter that will bolt onto the bellhousing?  I’m running the cast iron torqueflite. 

 

Any recommendations?

 

Thanks Mike

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DM6PR16MB3611383CEF7CC8ACFE026BC6B4D72%40DM6PR16MB3611.namprd16.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CABYqBVoK4_J-GhjXOwmCfLRsJ%2BNHkp4sFu4TEAg%3DTBFzFNhR4w%40mail.gmail.com.