RE: {Chrysler 300} axle shims

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Bob,

I had some made. I used them. My machinist still has the program in his jet cutter files, I think.  I posted the other days asking if anyone was interested and I would inquire about making a run of various sizes. No replies.

James

-----Original Message-----
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Bob Merritt
Sent: Thursday, December 12, 2024 10:28
To: chrysler 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} axle shims

Dim memory says someone in the club had the

57-64 style rear axle shims made.

I wonder if they are still available.

Bob


-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/f1ac34a7-10a7-4b1d-8d48-7a4f8e76183e%40simplexco.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171172A8F9FA42B9DDB8FB7933F2%40CY5PR19MB6171.namprd19.prod.outlook.com.