{Chrysler 300} Re: Choke tube 62 300H

[Kurt Brueske <kurt.brueske@xxxxxxxxx>]

Replying to myself (ha)!  I found a nice solution today at Menards...1/4" copper tube that was easily persuaded into shape.  I took a dremel tool and fashioned two small cuts at one end so I could taper to snug fit the choke housing.  Covered the thing with a spare Chrysler choke sleeve I had laying around and voila, I am good!  Pics attached.  OBTW, there are Dorman/TRW/etc. repair kits online but prices seemed kind of stupid, even more so after adding equivalent cost in shipping for a 2 oz. item.  

Now if I can just get the H started with that freshly restored distributor!

KB

On Tuesday, March 11, 2025 at 9:19:19 AM UTC-5 Kurt Brueske wrote:

Would anyone happen to have, or know where I could find, the choke heat tube directing heated air from the passenger exhaust manifold to the rear carb choke?  I suspect something like this could be fabricated but I thought I’d check with the club first.

Thanks in advance!

Kurt

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/0bea18b7-7080-4bab-8f55-756149cac285n%40googlegroups.com.

Attachment: IMG_9008.jpeg
Description: JPEG image

Attachment: IMG_9011.jpeg
Description: JPEG image

Attachment: IMG_9013.jpeg
Description: JPEG image