Re: {Chrysler 300} 1964 Chrysler 300K

["'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Harry did anyone respond?  The sending unit is just a resistor to ground.  A couple things to check first- the 5-pin connector on the back of the circuit card- pull it off and put it back on to try and re-seat the connection for sending unit, this connector frequently gets a little loose or the pins oxidize.  Could also ground sending unit wire and see if your temp pointer moves all the way to hot.  

D&K

Sent from my iPhone

On Apr 28, 2025, at 14:31, torg66 <torg66@xxxxxxxxx> wrote:

Hi group  my temperature gage is not working, getting power to the sending unit, it happen suddenly, any tips would be helpful. If sending unit needs replacing it will require removing A/C, ugh.

Thanks group, Harry

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/4afeeabb-5333-4848-a7e5-ba0fc56454b5n%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/0F796414-7D33-4545-88ED-B6524B2276D6%40yahoo.com.