{Chrysler 300} 1964 300K- Original Transmission just went out today
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 1964 300K- Original Transmission just went out today



Hello, Can someone advise if a later Big Block 727 Torqueflite will fit in a 64' 300K with the console mounted shifter?  I'd like to install a later single pump Torqueflite in the car.  Will the stock trans linkage work or does it require modification?  Is the later Torqueflite the same length or will I need the crossmember and driveshaft modified?  Anything else I would need to know before tackling?

I have no forward or reverse gears and the transmission was whining at all speeds prior.  RIP ole' girl....

Thanks!!!  James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/c9a113f2-b51a-433e-a74f-6de3b4af79bcn%40googlegroups.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.