{Chrysler 300} Elementary ignition question

["'Jay Williamson' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hello,

I have a question on my spark plug wires. I was replacing the cap and a couple of wires popped off. Now I’m not sure I have them in the right place. I have referred to the shop manual, but it looks like the cylinder order might be wrong on the diagram? I always thought that from front to back drivers side it was 2,4,6,8 and on the pass side it was 1,3,5,7. Also, this diagram shows the primary wire on the back side of the distributor and mine is attached in the front? Cap goes on just one way

Thanks for your help

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/14DAC60B-B744-44B9-8229-926A8360EFFF%40icloud.com.

Jay Williamson
317-223-1379

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/14DAC60B-B744-44B9-8229-926A8360EFFF%40icloud.com.