{Chrysler 300} Fwd: Disty pics

[John Nowosacki <jsnowosacki@xxxxxxxxx>]

Here are side by side pictures confirming my previous email.  You can see how the screw that holds the cap clip on the dual point is in the same position on both distributors, but it doesn't hold the cap clip on the single point.  The cap clip on the single point is attached to the distributor further below and also one post further left, making it appear to be 'offset' when compared to the dual point.

Use the screw as a reference and not the clip, and you'll be fine when swapping distributors.  

---------- Forwarded message ---------
From: John Nowosacki <jsnowosacki@xxxxxxxxxx>
Date: Fri, Aug 8, 2025 at 6:10 PM
Subject: Disty pics
To: John Nowosacki <jsnowosacki@xxxxxxxxx>

Sent from my iPhone

--

  

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cntXgJjfEHLzjJSV5C6EZaXKD4trLXoYEnTWYPgyXJdAZg%40mail.gmail.com.

Attachment: IMG_1833.JPG
Description: JPEG image