this is 3 pin one center pin on both ends must be neutral switch ? White nylon must get pushed back by R position — that R bump must be below or above centerline of N pin ( or both, an open fork? ) to turn on lights we can adapt wire to that center pin and shrink sleeve or use $ ripoff connector plug -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/E35320E7-A551-47F1-984E-A8B2BF004E36%40gradyresearch.com.
-- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/E35320E7-A551-47F1-984E-A8B2BF004E36%40gradyresearch.com.