{Chrysler 300} 1962 Wiper Motor Replacement

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I am pulling my wiper motor; as it won’t park anymore.

I have 1 step on the removal process that I need advice on….

(Trying to remove it by leaving the long Wiper Links in, thus separating the Motor Lever Arm from the Motor)

• Removed Glove Box AND Speaker
• Removed A/C Plastic Duct
• Pulled apart the pair of Wiring Harnesses that go to the Motor (they had factory grease on the connectors, that had leaked out of the motor; yum!)
• Removed Bolt from the Dash Brace Bracket
• Removed 3 Nuts that secure the Motor Bracket to the Inner Firewall
• Removed the 3/8” Nut & Star Washer that secures the Motor Lever Arm TO the pair of Wiper Links
• And now for the advice needed…..
• That threaded stud on the Motor Lever Arm….
• How do I get it to wiggle and separate from the Motor?
• I have sprayed it with WD40
• I have tried to wiggle the Drivers Side Link
• I have tried to (gently & with a large flat screwdriver) pry it a bit to separate itself from the Motor
• Any advice?

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/25C9BBD1-B3A2-4B63-9567-6D0A396427EC%40yahoo.com.