Re: are automatic trans parts balance critical?

["62-65-mail-list-club-Gary-H" <62-65-mail-list-club@xxxxxxxxxxx>]

It sounds as if you are assuming the holes drilled in the rear drums
are for balance? That seems logical but I don't know. There may be a
727 parts interchange reference book? 

Michael L. is still (I hope!) a member of this mail list and sees your
message. He used to run a Mopar transmission rebuilding company. 

Thanks, 
Gary H. 

 > -------Original Message-------
 > Im putting together a 1974 727TF that came from a 1974 dodge truck
 > with a 440. So yes by 1974, that 440 was most surely a cast crank
 > external balance motor. But, of course , several parts are bad and
I
 > have two other BB trannies to pull parts from to create a
 > frankenstein, a 1967 and a 1969, both of which were most likely
steel
 > crank/internally balanced motors. For instance the rear drum is
 > toasted but I have a real nice rear drum from the 1969 transmission
I
 > want to stick in there. But the 74 drum has 5 holes drilled all the
 > way through it and the 69 drum has three holes partially drilled
into
 > it, but not through. Is this an issue??
 > Thanks all.
 > Neal ZImmerman, Eugene Oregon
 > 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/1962to1965mopars/20250426145854.1998.qmail%40server309.com.